Int F1 - Common Isdn Api (capi) V2.0 - "capi_release" - Unregister From [-]
AL = 02h
AH = CAPI version number * 10 (14h for v2.0)
DX = application ID (see INT F1/AL=01h)
Return: AX = status (0000h,11xxh) (see #3710)
Notes: the caller is required to provide at least 512 bytes of stack space
See Also: AH=02h,INT F1/AL=01h,INT F1/AL=03h
(Table 3710)
Values for CAPI v2.0 error code:
0000h successful
1001h too many applications
1002h logical block size too small (must be at least 128 bytes)
1003h buffer > 64K
1004h message buffer too small (minimum 1024 bytes)
1005h too many logical connections requested
1006h reserved
1007h could not register because CAPI busy, try again
1008h OS resource unavailable (out of memory, etc.)
1009h COMMON-ISDN-API not installed
100Ah controller does not support external equipment
100Bh controller supports only external equipment
1101h invalid application ID
1102h illegal command or subcommand, or message too short
1103h message queue full
1104h queue empty
1105h queue overflowed (message lost)
1106h unknown notification parameter
1107h could not accept message because CAPI busy, try again
1108h OS resource unavailable (out of memory, etc.)
1109h COMMON-ISDN-API not installed
110Ah controller does not support external equipment
110Bh controller supports only external equipment
2001h message not supported in current state
2002h illegal controller/PLCI/NCCI
2003h out of PLCI
2004h out of NCCI
2005h out of LISTEN
2006h out of FAX resources (T.30 protocol)
2007h illegal message parameter coding
3001h unsupported B1 protocol
3002h unsupported B2 protocol
3003h unsupported B3 protocol
3004h unsupported B1 protocol parameter
3005h unsupported B2 protocol parameter
3006h unsupported B3 protocol parameter
3007h unsupported B protocol combination
3008h NCPI not supported
3009h unknown CIP value
300Ah unsupported flags (reserved bits set)
300Bh unsupported facility
300Ch data length not supported by current protocol
300Dh reset procedure not supported by current protocol
See Also: #3709