CMOS-Memory Map            Release 56      Last change 21dec97


Compiled from multiple sources by Padgett Peterson
Corrections/additions/comments to: padgett@tccslr.dnet.mmc.com

No guarantees of any kind.

Copyrights/Trademarks belong to whoever they may belong to.

Found: Algorithm used by IBM in calculating CRC checksums for PS/2
       (see bytes 32h-33h). Complex (recursive part is 12 lines of
       assembly) and not yet validated for every model.
--------!---Note-----------------------------
           Background

The CMOS (complementary metal oxide semiconductor) memory is actually
a 64 or 128 byte battery-backed RAM memory module that is a part of the
system clock chip. Some IBM PS/2 models have the capability for a
2k (2048 byte) CMOS ROM Extension.

First used with clock-calender cards for the IBM PC-XT, when the PC/AT
(Advanced Technology) was introduced in 1985, the Motorola MC146818
became a part of the motherboard. Since the clock only uses fourteen of
the RAM bytes, the rest are available for storing system configuration data.

Interestingly, the original IBM-PC/AT (Advanced Technology) standard for
the region 10h-3Fh is nearly universal with one notable exception: The

IBM PS/2 systems deviate considerably (Note: AMSTRAD 8086 machines were
among the first to actively use the CMOS memory available and since they
*predate* the AT, do not follow the AT standard).

This is just another example of how IBM created a standard, lost control
of it, tried to replace it, failed and lost market share in the process.

Originally, the IBM PC/AT only made use of a small portion of CMOS memory
and was defined in the IBM PC/AT Technical Reference Manual, specifically
bytes 10h, 12h, 14h-18h, 2Eh-33h. The balance was left undefined but was
quickly appropriated by various BIOS manufacturers for such user-selectable
options such as wait states, clock speeds, initial boot drive selection, and
password storage.

Later, as CMOS memory requirements grew, newer clock chips with 128
bytes of RAM came into use. However the fact remains that once the AT
standard was established, only IBM has tried to change the definitions
of that first description.