Int 15 Fn 5307  - Advanced Power Management V1.0+ - Set Power State        [p]

   AX = 5307h
   BX = device ID (see #0400)
   CX = system state ID (see #0401)

Return: CF clear if successful
   CF set on error
       AH = error code (01h,03h,09h,0Ah,0Bh,60h) (see #0399)

Note:  should not be called from within a hardware interrupt handler to avoid
     reentrance problems

See Also: AX=530Ch

(Table 0400)
Values for APM device IDs:
 0000h system BIOS
 0001h all devices for which the system BIOS manages power
 01xxh display (01FFh for all attached display devices)
 02xxh secondary storage (02FFh for all attached secondary storage devices)
 03xxh parallel ports (03FFh for all attached parallel ports)
 04xxh serial ports (04FFh for all attached serial ports)
---APM v1.1+ ---
 05xxh network adapters (05FFh for all attached network adapters)
 06xxh PCMCIA sockets (06FFh for all)
 0700h-7FFFh reserved
 80xxh system battery devices (APM v1.2)
 8100h-DFFFh reserved
 Exxxh OEM-defined power device IDs
 F000h-FFFFh reserved

(Table 0401)
Values for system state ID:
 0000h ready (not supported for device ID 0001h)
 0001h stand-by
 0002h suspend
 0003h off (not supported for device ID 0001h)
---APM v1.1---
 0004h last request processing notification (only for device ID 0001h)
 0005h last request rejected (only for device ID 0001h)
 0006h-001Fh reserved system states
 0020h-003Fh OEM-defined system states
 0040h-007Fh OEM-defined device states
 0080h-FFFFh reserved device states