00E - Diagnostics Status Byte
1xxx xxxx Real-Time Clock Chip Power
When set to 1, this bit indicates the real-
time clock chip lost power.
x1xx xxxx Configuration Record and Chechsum Status
When this bit is set to 1, the checksum is
incorrect.
xx1x xxxx Incorrect Configuration
This is a check, at power-on time, of the
Equipment byte. When set to 1, the confi-
guration information is incorrect. Power-on
checks require that at least on diskette
drive be installed (bit 0 of the equipment
byte - 014 - is set to 1).
xxx1 xxxx Memory Size Miscompare
When set to 1, the power-on check determined
that the memory size is not the same as in
the configuration record.
xxxx 1xxx Fixed Disk Controller
When set to 1, this bit indicates that the
controller or drive C failed initialization,
which prevents the system from attempting
a power-on reset.
xxxx x1xx Time Status Indicator
When set to 0, this bit indicates the time
is valid. When set to 1, this bit indicates
the time is invalid.
xxxx xx1x Adapter Configuration Miscompare
This bit indicates if the installed adapters
match the configuration information. When
set to 1, the adapter do not match the
configuration information.
xxxx xxx1 Adapter ID Time-Out
When set to 1, this bit indicates a time-out
while an adapter ID was being read.